Single carburetor kit with PD36J carburetor for XV535 Yamaha

PLEASE READ ENTIRE DESCRIPTION BEFORE YOU BUY!
Please buy responsibly. Cheaters, cheep scatters, beginners or game players are not welcome! THIS IS MANDATORY! IF YOU HAVE NO IDEA WHAT YOU ARE DOING JUST SIMPLY DON'T BUY IT!!! THANKS A LOT...  

Manifold is bolted on with the reason... Once fuel goes trough manifold it cools it down. So it is very important to keep manifold heated up. Bolt on manifold is attached to the cylinders and heat is transferred to the manifold. F.ex. mounted with rubber boots or so, mounted different way, single carb set up wont work properly because mixture will be rich no matter what jetting is. Let say you having a moonshine distillation machine... that develops a liquid from the steam. Long story short. Manifold should be warm enough to deliver atomized fuel in to the engine as a gas.
If you are not sure how to complete your project or have not enough confidence how to do it right, please DO NOT BUY IT!!! Don't waste yours and my time. I m not taking returns at all, only if part is defective due to manufacturing issues or so. No beginners or game players please. I m working hard to make you old timers get back on the road. Your cooperation would be appreciated. Thank you for understanding.
NOTE: Engine tuning should only be performed by experienced mechanics as a "too-lean" condition can melt pistons and a "too-rich" condition can lead to excessive component wear and failure. Always do frequent plug checks or O2 measurements when making any carb adjustment.

STRICTLY FOLLOW THE INSTALLATION GUIDE BELOW!
WARNING! DO NOT INSTALL THE MANIFOLD WITHOUT GASKETS TO PREVENT DEFORMATION OF THE FLANGES. MANIFOLD WONT FIT WITHOUT THE GASKETS. THIS IS MANDATORY!
BLACK RTV on gaskets must be used installing the manifold to assure 100% seal.
1. Apply RTV on cylinder heads
2. Stick the gaskets and let them sit for a while.
3. Apply RTV on the manifold and gently tie the bolts.
4. Let it dry for about 45 min - 1 hour.

Parts Included:
Manifold
2 x gaskets
1 x Carburetor PD36J
1 x Carburetor mount/boot
If you are unsure how to install the manifold and or carb after reading an Installation Guide, please take your  part(s) to a licensed or certified mechanic for install. I cannot be held responsible for damaged product due to buyers lack of knowledge.
I do not accept returns due to buyers remorse, lack of understanding how to install, product damaged during installation or incorrect product purchased for your particular bike. If you have any questions, please contact.

MOTE!

Manifold is brand new, carburetor uis slightly used in perfecr condition.